143g Eachine SHADOW FIEND LR 4S 180mm 4″ RC Drone – Caddx Nebula

$154.35

Out of stock

Category:
Add to compare

Description

Summary:

Eachine SHADOW FIEND Designed from a role from DOTA–NEVERMORE. The 4″ Arm just like fire surrounding

with SHADOW FIEND, 20cm height drone, and 180mm wheelbase makes a steady flight, what’s more, the lightweight (below 150g) improves SHADOW FIEND to longer battery life.  It will definitely bring you a flash cool experience with a unique design.

SHADOW FIEND 4 inch is the lightest 4-inch Micro Long Range FPV at present. The minimum takeoff weight is within 250g, If you are looking for an FPV that can fly around 30 minutes, SHADOW FIEND 4 inch is a powerful and flexible flight.it will satisfy all your needs. If equipped with 4S 850mah lipo, flight time about 14-minutes, and use 4S 3000mAh battery, flight time is more than 27-minutes.

Eachine SHADOW FIEND independently designed GPS module added GPS function. When the signal is lost or the VTX is out of control, the GPS rescue mode is activated to prevent the aircraft from getting lost.

Description:

Brand: Eachine

Item Name: SHADOW FIEND LR 4″ Micro Long Range RC Drone

Weight: 143g(Without Battery)

Frame Wheelbase: 180mm

Bottom Plate: 3mm

Top Plate:2mm

1404 2750kv Motor KV:2750rpm/v

NO-Load Currency(IO/10V):0.2

Support Lipo: 2-4S

Weight: 10.8g

Max Con. Current: 7.16A

Max Power: 119.4W

Pull: 284G(16.8V/4024R)

Configuration: 12N/14P

Internal resistance(Rm): 0.486Ω

Stator Diameter: 14mm

Stator Length: 4mm

Motor Dimensions(Dia.*Len): Φ20x19mm

Shaft Length: 4mm

Shaft Diameter: 1.5mm
Mounting Hole Distance: 9*9mm

Screw: M2

Recommend Prop: 2-4″

F405 FC Main control chip: STM32F405

IMU: MPU6000

BEC:5V/1A

Integrated OSD

Support PPM/DSM/IBUS/UAR: UART6-RX

Mounting Hole: 20*20mm

Weight: 3.0g

Support Firmware: betaflight/cleanflight/inav

Support Programmable LED Sprit

Support Buzzer

20A 3-6S 4IN1 ESC Con. Current:20A

Peak Current:25A(10s)

Input Voltage: 2-6s

BEC: No

Ammeter: No

Main control chip: EFM8BB21F16G

Firmware: BLHeli_S

Support DSHOT150/300/600 / MULTISHOT / PWM / ONESHOT

Weight: 7g
Mounting Hole: 20x20mm /Φ2
Size: 32*32mm

 

VISTA KIT/Nebula Nano V2(Optional)

CADDX Nebula NanoV2

Camera: 14*14*21mm

VISTA Kit: 30*29*13mm

Operating Frequency: 5.725-5.850GHz

Transmitter Power(EIRP):FCC / SRRC / MIC:<30dBm,CE:<14dBm

Min. Latency (end-to-end): 720p 60fps/32ms

Transmission distance: FCC / SRRC:4km,CE:0.7km

I /O Port:USB-C,IPEX,3in1connector,microSD Card slot

Support FC System: F3,F4,F7

Operating temperature: 32°~104°F(0℃ 〜40 ℃)

Input Voltage: 7.4-26.4V

Power:25mw/200mw/500mw/700mw switchable

 CADDX Vista 

1080P Recording

Vista Kit: 30x29x13mm

Camera: 27.4×21.1×20.1mm

Operating Frequency: 5.725-5.850GHz

Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm

Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms

Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km

I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot

Supported Flight Control System: F3,F4,F7

Operating Temperature Range: 32° to 104° F (0℃ ~40℃)

Input Power: 7.4-26.4V

GEMFAN4024 2-Bladed Prop Material: PC
Quantity: 4Pairs (8pcs)

Color: Transparent
Weight: 1.61g /pc

Center thickness: 5.5mm

Receiver Pre-built DJI Receiver

Package Include:

1* Eachine SHADOW FIEND LR 4″ RC Drone BNF-DJI

1* GEMFAN 4024 Propeller

1*Spare Battery Strap

2mm Anti-slip Battery Pad

M2*6 Socket Head Cap Screw

M2*7 Hexagon Socket Head Cap Screws