Eachine Novice-III – 2x Battery(1 Broken motor, No Charger Power Cable)


Out of stock

Add to compare


Brand Name: Eachine
Item Name: Novice-III 2-3S Toothpick RTF & Fly more
Wheelbase: 135mm
Size: 115mm*110mm*40mm
Weight: 62g(without battery)

New toothpick F4 flight controller
Internal SPI Frsky D8/D16 receiver (Dual antenna and with PA)
Powerful and smoothly and long flight time (about 8~10 Mins)
Led Strip ready
Built-in Buzzer ready
New design 1203 KV5500 motors
Camera Angle adjustable
VTX power switchable 25mw~400mw
Smart audio ready, change VTX bands, powers, channels via OSD
720P DVR ready (Analog 1280*720)
Real Ready to fly
Compatible both for 2s-3s Lipo/LIHV

Spare parts specifications:

Motor Model: EX1203
KV options: KV5500
Stator Diameter:15mm
Stator Length:3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ15mm*15mm
Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 8V-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky D8/D16 SPI receiver
Built-in 2.4G Power Amplification
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Built-in 5V 1.5A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)

Current: 10A continuous peak 12A (5 seconds)

Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_7.HEX
Default protocol: DSHOT600

Internal Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 compatible
Compatible Non EU transmitter both D8 mode and D16 mode
Channels: 8ch/16ch
Dual antenna
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 400m
VTX&DVR Output power: 25~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smart audio ready
Caddx EOS2 1/3″ CMOS Sensor
1200 TVL
2.1mm lens
4:3 Image size
Global WDR
Internal Synchronization
Lipo Battery Capacity:450mAh
Continuous Discharge Rate: 75C
Size: 66mmx21mmx18mm
Weight: 42g
Connector: XT30
Eachine EV800 Goggles Screen size: 5.0 inch
Screen resolution: 800*480 (No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
3x boost of the video to acquire intense feel-in-there video;
92% transparent rate no distort of light;
Built-in 3.7V/2000mAh battery;
Each battery circle offer around 3.5hr working time;
5-12V wide recharging voltage range, typical recharging voltage is 5V
Accepts 5V power banks or 2S(7.4V)/3S(11.1V) battery as back-up power to have long working time
Eachine ER8 2.4G Radio Brand Name: Eachine
Channels: 8
Mode: Mode 2
Firmware: OPENTX 2.19
Working voltage:7.4v~12v
Frsky D8 receiver compatible
Distance: >1000m (depends on actual situation)
Size: 200x150x80mm

Package Included:

RTF Version
1 x 135mm Toothpick Frame
1 x F4 Flight Controller
4 x NC1203 KV5500 Motor
2 x HQPROP T3*2 bi-blade propeller (2cw+2ccw)
1 x Caddx EOS2 new version 4:3 Camera
1 x Eachine Pegasus VTX: 5.8g 25mw~400mw switchable built-in 720p DVR
2 x Tattu 11.1v 450mah 75C Battery
1 x 2-4S Balance Charger
1 x Eachine EV800 Goggles
1 x Eachine ER8 2.4G Transmitter
1 x Propeller Disassemble Tool
1 x Screwdriver