Name: Happymodel Larva X 100mm 2-3S 2.5 Inch FPV Racing Drone (USED)
SKU: 8340
Price: 55.00 USD
Availability: OutOfStock

Description

Specification:
Brand Name: Happymodel
Model: Larva X
Item Name: 100mm 2-3S 2.5 Inch FPV Racing Drone
Wheelbase: 100mm
Size: 88x88x45mm (without propellers)Weight: 50g (without battery)Drone Version: BNF ( With Receiver & Without Battery)

Happymodel EX1103 7000KV Motor	Mode: EX1103KV options: KV7000Configu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter: Φ1.5mmMotor Dimension(Dia.*Len):Φ13.5x16mmWeight:3.7g
Crazybee F4 Pro V3 Flight Controller	(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DXMCU: STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000 (SPI connection)Board Size: 28.5x 28.5mmPower Supply: 2-4S battery input (DC 7-17V)Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 readyFrsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)No RX version need to add external ReceiverBuilt-in Betaflight OSD(SPI Control)Built-in Current meter Max 70ACurrent meter scale set to 470Built-in 5V 1A BECBuilt-in voltage detection
Onboard 10A 4in1 ESC	MCU upgraded to EFM8BB21Power supply: 2-4S LiPo/LiPo HV (7v/17v)Con. Current: 10A Burst Current: 12A (5S)Support BLHeliSuite programmableFactory firmware: F_H_40_REV16_5.HEXDefault protocol: DSHOT600
Onboard Frsky D8 Receiver Version ( Internal Frsky NON-EU receiver Version)	SPI BUS receiverFrsky D8/D16 switchableCompatible Non EU transmitter both D8 and D16 modeChannels: 8ch or 16chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 300m
Internal Flysky Receiver Version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support
External TBS Crossfire Receiver version	CRSF Protocol , Official TBS transmitter compatible
External DSMX Receiver version	Frequency range: 2.403-2.479GhzInput power: 3.3V — 5VResponse time: 22ms / 11msResolution: 1024/2048Display method: LEDOperating voltage: 3.3VWorking current: 60MASize: 18mm13mm5mmWeight: 0.9 gAntenna length: 30mmData format: Serial portProtocol: DSM2/DSMXDistance: no ground interference (1 m from the ground ) more than 300m
External Frsky RXSR Receiver version	Weight: 1.5gNumber of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)Operating Voltage Range: 3.5V~10VOperating Current:70mA@5VFirmware UpgradableCompatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCST Protocol ( Upgrade firmware)
Happymodel Diamond_VTX	Output power: 25~200mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 250mA~510mA(type)Antenna: RG178 antennaU.FL interfaceFrequency: 5.8GHz 5bands 40 channelsWith RacebandSmartaudio readyWeight: 3g without antennaVideo Output Size: VGA (640×480) Video Output format: NTSCRecord video size : 1280×720 @25FPSTF Card support: Max.32GInterface: JST SH1.0 3pin for Camera JST SH1.0 5pin for Connect with F3/F4 Flight controllerCompress Format: AVI
Runcam NANO2 FPV Camera	Model: Nano 2Image Sensor: 1/3″ CMOSHorizontal Resolution: 700TVL Lens: 2.1mm(M8) FOV 155°Signal System: NTSC / PALS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: 0.01Lux@1.2FD-WDR: AutoDay/Night: ColorPower: DC 3-5.5VCurrent : 110mA@5V 120mA@3.3VHousing Material: ABSNet Weight: 3.2gDimensions: 14x14x16mm ( LxWxH)
Recommend Lipo Battery ( All Version Don’t Include)	Recommend 2S 450mAh Lipo / 3S 300mAh/350mAh/ 450mAh Lipo Battery

Features:– New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible- Powerful and smoothly- Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles- Camera Angle adjustable- VTX power switchable 25mw~200mw- Smartaudio ready , change VTX bands, powers, channels via OSD- Receiver option: Frsky D8/ Flysky / DSMX / Frsky RXSR/ TBS CRSF – Diamond VTX Ready- Compatible both for 2-3S Lipo/LIHV
Package Included:
1X Larva X frame1X Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky NON-EU RX Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX4X 1103 KV7000 motor4X Micro Avan Rush Propeller 2.5 Inch ( 4 CW & 4 CCW)1X Runcam Nano2 Camera1X 5.8G 25-200mW VTX1X Propeller disassemble tool1X Screwdriver